Cummins Engine Fire Pump

Cummins Engine Engine Speed : 2900 Rpm Power : 88.5 - 302 HP (66 - 225 kW) NFPA-20 Design for Commercial, Industrial, and Marine Use Radiator Cooled

Fawde Engine Fire Pump

Fawde Engine Engine Speed : 3000 Rpm Power : 72.5 - 131.5 HP (54 - 98 kW) NFPA-20 Design For Commercial and Industrial Use Radiator Cooled Natural and Turbocharger Aspiration Available

SPP Split Case Fire Pumps

SPP Fire Split Case Pumps PUMPS SPP has been manufacturing fire pumps for over 135 years with one of the widest range of approvals of any manufacturer in the world. SPP Thrustream FM/UL Approved Fire Pumps are available for duties ranging from 200 USgpm to 5000 USgpm and are suitable for electric or diesel drives. SPP Thrustream FM/UL Approved Fire Pumps are available with either inch or metric fittings.

Electric Fire Pump F 8542

1. Electric Pump F 8542  Model: Forta F 8542 – NFPA 20 Std.  Type: Horizontal centrifugal split casing pump  Capacity: 1000 gallons per minute at 120 meters  Motor: Forta, TEFC, Class F, IP55, 100 kW/2900 RPM/3 phase/380 V/50 Hz  Suction/Discharge: 8″/5″

Patterson Horizontal Split Case Fire Pumps

Sentinel™ Horizontal Split Case Fire Pumps Sentinel™ HSC Pumps are engineered for reliable operation upon demand. All fabricated parts are standardized and accurately machined for true alignment, increasing overall durability. Precision balancing of all rotating components provides mechanical dependability, reliable operation and minimal maintenance. Impellers are constructed with double inlets that practically eliminate end thrust while boosting operating efficiency. These high-efficiency units operate with pressures in excess of 390 psi (27 bar), produce heads to 750 ft (229 m) and flows from 150 to 5,000 gpm (568 to 18,925 litres/min). They are available with electric, diesel, or dual drive power and vertical or horizontal orientation. Their simple, split case design allows for in-line service without disturbing piping.

Patterson Vertical In- Line Fire Pumps

Sentinel™ Vertical In-Line Fire Pumps The compact, self-contained design of Sentinel™ Vertical In-Line Fire Pumps makes them easily adaptable to new or existing applications. They are a great alternative to Sentinel HSC Fire Pumps when lower flow ranges are needed, minimizing energy consumption while lengthening service life. With the inlet and outlet on a common center line, these pumps are easy to install with simple mounting requirements—only standard piping supports on either side of the pump. This eliminates the need for costly foundations or pads. Pressure ratings from 40 to 150 psi (3 to 10 bar) deliver flow ranges of 50 to 1,250 gpm (189 to 4,731 litres/min). Every pump has standard packing and a two-piece gland for durability.

Patterson Turbine Fire Pumps

Sentinel™ Vertical Turbine Fire Pumps Among the most versatile pumps in Patterson's arsenal, the Sentinel™ Vertical Turbine Fire Pump stands on our vertical pump expertise. Because it embodies the latest design concepts and engineering technology, this pump is ideal for fighting fire. Flexible staging enables these units to meet capacity requirements in a minimum of floor space. Standard construction offers cast iron discharge heads with a fabricated steel column, stainless steel head and bowl shafts, or alloy steel line shaft and cast iron bronze fitted bowls. Special metallurgies are also available. No priming is necessary to provide flows from 500 to 5,000 gpm (1,892 to 18,925 litres/min), with pressures in excess of 350 psi (24 bar).